Bulk materials
Septic Sand
Clean sand for septic system and drain-field work, delivered by the cubic yard.
What it is
Septic sand is a clean sand used in septic system and drain-field installations. Septic work is permitted and specified by the installer, so match the sand to the specification for your project.
Common uses
- Septic drain-field installations
- Septic system repairs and replacements
- Bedding and backfill where the installer specifies sand
In plain English
Septic Sand, explained without the jargon
Written for anyone who has never ordered bulk material before. If your project sounds different to what you read here, tell us about it and we will talk it through.
What it looks like
Clean, coarse sand with no soil, silt or organic material in it.
How big the pieces are
Coarser and grittier than mason sand.
What it is like to walk or drive on
Loose and coarse. It is a buried material, not a surface.
What it is normally used for here
Septic drain-field installation and repair, and backfill where an installer has called for a clean sand.
How it handles water
Very free-draining, which is the whole reason it is used.
When not to use it
Not a planting soil and not a paver base.
What it gets confused with
Mason sand and general fill sand. Septic work is permitted and specified, so match the sand to the specification for your job and ask your installer what the permit requires.
How it changes over time
Stays loose and free-draining rather than compacting into a crust.
Sizes are approximate. Crushed stone and shell are screened rather than cut to size, so every load holds a range of pieces and some dust.
Planning your order
How much septic sand do you need?
Your septic contractor or permit will specify the amount and type of sand. Send us the quantity and delivery address and we will schedule it.
As a general rule, one cubic yard covers about 100 square feet at 3 inches deep. Coverage changes with depth and material, so use the calculator for your numbers and we will confirm before delivery.
Before you order: a quick checklist
- Measure the length, width and planned depth. The calculator turns them into cubic yards.
- Consider depth. It changes the quantity more than most people expect. We can advise on depth for the job.
- Pick the drop spot: a firm, reachable place close to where you will use the material.
- Check access: gates, soft ground, low wires or branches and tight turns. Delivery checklist.
- Check community rules on bulk deliveries and materials if you have an HOA.
- Deliveries have a 3 cubic yard minimum, and the delivery fee is set by ZIP code.
Delivery
Delivered to your driveway or job site.
We deliver to accessible driveways and job sites across Fort Myers and Southwest Florida. Let us know about gates, soft ground, low wires or HOA rules when you request a quote.
- 3 cubic yard minimumDelivered by the yard to your driveway or job site.
- Typically 3–5 daysNext-day is often available, depending on material and routing.
- Fee set by ZIP codeQuoted up front, before your order is confirmed.
- Fort Myers basedDelivering across Lee County and Southwest Florida.
Guides
Before you order
Related materials
You may also need
Need Septic Sand delivered?
Send the address, measurements and how you will use it. We will confirm the yardage, price and delivery fee.